Model Number

SA-GSM

1.10seconds voice and message recorded to transmit an alarm 2.Preset 6 phone numbers which can be dial automatically to inform theft 3.The PIR detector can activate or deactivate separately 4.Arm or disarm with remote controller or phone in long-distance under password protection. 5.Alarm phone line has a priority when the phone line is engaged 6.User does not need to connect it with phone line because it can work as a mobile unit 7.Send short message to alarm 8.With built-in Li-ion battery 9.Set up siren hooting time No need of telephone line in order to have your location fully protected Program the duration length of the siren. Password protected. Record your own personal message for ten seconds Up to 6 telephone numbers can be pre-stored in the unit and dialed to summon help in priority order. Remote command and access to the system from anywhere via any telephone/mobile Emergency/panic button is available for 24 hours whenever arm/disarm Separately arm/disarm for certain detected areas Able to link up to the networks of alarm center through an ID code The simple way to install: A, Please put the GSM main unit in proper place. B, Take one mobile SIMCARD to put into the main unit.Please open the cover carefully and insert the SIMCARD properly. C, After that, please tighten the screw. D, Accordingly insert the power and siren, once you hear one sound "B", it means this alarm system starts to initialization. E, Auto-check GSM network and log on.Initialization time is about one minute.The activated LED flashes as initialization.. F, System initialization completed, you can hear one long sound "B", the activated LED stops flashing and becomes normal, that means the whole alarm system is now activated.If network logging on is failed, the network LED flashes.If initialization is failed, you can hear constantly short sound "B", that means SIMCARD is out of network or boot-strap uncompleted.The system is not available to dial out telephone number, just fitting independently locale alarm. G, The boot-strap processing of the System is successfully completed.